MAX4547 |
RFQ for MAX4547 Required Field |
 |
| Technical/Catalog Information | MAX4547CEE |
| Vendor | Maxim Integrated Products |
| Category | Integrated Circuits (ICs) |
| Type | Video Switch |
| Voltage Supply Source | Single, Dual Supply |
| Voltage - Supply, Single/Dual (±) | 2.7 V ~ 12 V, ± 2.7 V ~ 6 V |
| Circuit | 2 x SPDT |
| On-State Resistance | 20 Ohm |
| Mounting Type | Surface Mount |
| Package / Case | 16-QSOP (SSOP) |
| Packaging | Tube |
| Current - Supply | 1A |
| Operating Temperature | 0°C ~ 70°C |
| Function | Video Switch |
| Drawing Number | * |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | MAX4547CEE MAX4547CEE |
| Product | Manufacturers | Pack | D/C |
| MAX4547 | - | - | - |
The MAX4545/MAX4546/MAX4547 are low-voltage T-switches designed for switching RF and video signals from DC to 300MHz in 50Ωand 75Ω systems. The MAX4545 contains four normally open single-pole/single- throw (SPST) switches. The MAX4546 contains two dual SPST switches (one normally open, one normally closed.) The MAX4547 contains two single-pole/double-throw (SPDT) switches.
Each switch is constructed in a "T" configuration, ensuring excellent high-frequency off isolation and crosstalk of -80dB at 10MHz. They can handle Rail-to-Rail®analog sig- nals in either direction. On-resistance (20Ωmax) is matched between switches to 1Ωmax and is flat (0.5Ωmax) over the specified signal range, using ±5V supplies.The off leakage current is less than 5nA at +25°C and 50nA at +85°C.
These CMOS switches can operate with dual power sup- plies ranging from ±2.7V to ±6V or a single supply between +2.7V and +12V. All digital inputs have 0.8V/2.4V logic thresholds, ensuring both TTL- and CMOS-logic com- patibility when using ±5V or a single +5V supply.
Typical Application |
Features |
| RF SwitchingVideo Signal RoutingHigh-Speed Data AcquisitionTest EquipmentATE EquipmentNetworking | Low 50ΩInsertion Loss: -1dB at 100MHzHigh 50ΩOff Isolation: -80dB at 10MHzLow 50ΩCrosstalk: -80dB at 10MHzDC to 300MHz -3dB Signal Bandwidth20ΩSignal Paths with ±5V Supplies1ΩSignal-Path Matching with ±5V Supplies0.5ΩSignal-Path Flatness with ±5V Supplies±2.7V to ±6V Dual Supplies +2.7V to +12V Single SupplyLow Power Consumption: <1µW Rail-to-Rail Bidirectional Signal HandlingPin Compatible with Industry-Standard DG540, DG542, DG643>2kV ESD Protection per Method 3015.7TTL/CMOS-Compatible Inputswith Single +5V or ±5V |
V+...........................................................................-0.3V, +13.0V
V-............................................................................-13.0V, +0.3V
V+ to V-..................................................................-0.3V, +13.0V
All Other Pins (Note 1)...........................(V- - 0.3V) to (V+ + 0.3V)
Continuous Current into Any Terminal..............................±25mA
Peak Current into Any Terminal
(pulsed at 1ms, 10% duty cycle).......................................±50mA
ESD per Method 3015.7...................................................>2000V
Continuous Power Dissipation (TA= +70°C) (Note 2)
16-Pin Plastic DIP
(derate 10.53mW/°C above +70°C)................................842mW
16-Pin Narrow SO
(derate 8.70mW/°C above +70°C).................................696mW
16-Pin QSOP (derate 8.3mW/°C above +70°C)...............667mW
20-Pin Plastic DIP (derate 8.0mW/°C above +70°C)........640mW
20-Pin Wide SO (derate 10.00mW/°C above +70°C).......800mW
20-Pin SSOP (derate 8.0mW/°C above +70°C)................640mW
Operating Temperature Ranges
MAX454_C_ E.........................................................0°C to +70°C
MAX454_E_ E......................................................-40°C to +85°C
Storage Temperature Range.............................-65°C to +150°C
Lead Temperature (soldering, 10sec)..............................+300°C
